American Platforms produces custom size weightlifting platforms to replace your existing platforms or choose American Platforms weightlifting platforms for your new racks. It's easy, simply select the custom link and follow the easy instructions.
Custom Fit
To Your Rack
4’ x 8’ Beleved
Edges
Slip Resistant
Surface
3/4" Thick
Platforms
We also produce custom weightlifting platforms with inserts to fit all Rogue ™ Racks and Sorinex™ Rack systems.
1/8
FAQ's
How to measure for your custom platforms?
Adding new or replacing old and tired platforms is simple. The first step is to measure the interior of your rack, front to back and side to side More…
What are my options for logos?
American Platforms & Logos deliver several options when it comes to your platform or floor logos. We have standardized our offering, as well as providing custom sizes.
- 2’x2′
- 2’x3′
- 3’x3′
You may add a logo to simply one platform or as many as you need. We do not add minimums. American Logo Benefits:
- Affordable budget friendly
- Rhino-tough extreme durability
- Accu-color match for your organization’s colors
- Simple installation
- May be used on new or existing rubber, wood, or concrete floor surfaces.
Why all rubber vs. traditional metal frame platforms?
Safety first. Our American made all rubber platforms are 19mm tall, with beveled edges on all of the exposed sides. This provides a safe transition to the base floor and creates a minimum step range.
- Cost – budget friendly
- Sound & vibration reduction
- Force reduction – plyometric friendly
- Safer for your athletes and equipment
- Improved traction
- Extreme durability – less need for replacement
- Custom fit to your new or existing rack
- Self installation – budget friendly
- Simply a smart choice
Traditional Metal Frame Platforms
- Expensive
- Tall and not as safe as all-rubber alternatives – 3″ to 4″ in height typically
- Typically no transition to base floor unless a separate purchase
- Little force reduction = damaged bumper plates and bars
- Heavy and hard to manage
- Wood platform centers wear and do not last long
- Logos need replacement frequently
Can you help me with my rubber flooring and turf?
Yes, we work with the largest and best manufacturers in sports flooring, weight room flooring, and synthetic turf.
We have installation teams available to install on a nationwide scale for your convenience.
We are here to answer any questions you may have on sports flooring.
HOW ARE LOGOS APPLIED OR ATTACHED?
You will be provided with instructions and an installation video to speed up the installation process. We are also available for phone consultation to help guide you when needed. Lastly, if you feel uncomfortable self-installing your new logos, we can help locate a qualified professional to install them:
- Logos are shipped separately from the platforms.
- Logos are not pre-installed on the weightlifting platforms.
- Most customers self-install our logos since they are so easy to install.
- Each logo takes approximately 10 to 15 minutes for installation and do not require any special skills.
HOW TO CARE FOR MY AMERICAN PLATFORMS LOGOS
Your logos are protected with a strong anti-skid laminate to increase their life. They may on occasion become soiled, if they require cleaning, then use a damp cloth or neutral cleaning solution to clean the surface. Harsh or powerful cleaning chemicals, commercial power floor brushes, scrubbers, or pressure wash/spray guns should never be used on the logo(s) or around them. The logo(s) should never be saturated or allow water to “stand” on or around the logo application area as this can compromise the adhesion and also the laminate component of the logo.
DO NOT bend or flex your logos after installation. If you have applied American Platforms logos to our low profile all-rubber platforms, do not attempt to relocate them or roll/bend the rubber tiles. Bending or rolling the substrate will result in adhesion failure of the logo and rubber contact surface.
If you must relocate your American Platforms with American Platforms Team Logos installed, please consult a customer service representative with American Platforms for proper instructions to avoid damage or adhesion failure of the logos.
HOW TO PREVENT DAMAGE TO MY LOGOS
Your logos are extremely durable and designed to be used in active athletic environments. To prevent damage to your custom logos, inspect your benches or other equipment that may be rolled over the logos for protection at the base.
This protection is in reference to rubber or plastic covers on the feet, base, or cleats that come in contact with the floor. Your bench or other equipment should have rubber or plastic covers to prevent uncovered or sharp metal contact with the logos.
Instructing your athletes to lift and roll the benches as they are designed rather than dragging or pulling benches or any heavy items across the logos can prevent damage. Not following this simple step can result in damage to your logos. In some cases, minor edge chipping may be unavoidable.
Ready to
Get Started?
Simply share a bit about your business needs.
Call or Text:(270) 227 2332
Please note: our promedio email response time is approximately 48 hours
